[. . . ] This system provides an economically lightweight and attractive finish to all makes and styles of ICF Block. RASP FOAM BLOCKS TO REMOVE OXIDATION AND TO LEVEL SURFACE ADVANTAGES G G G G G G G G G Flexible Stain Resistant Excellent Resistance to Freeze Thaw Water Resistant Excellent Crack Resistance Abrasion and Impact Resistant Super Adhesion Non Chalking Wide Variety of Colors SPRAY OR TROWEL BASE COAT ONTO ICF BLOCK SURFACE PREPARATIONS Remove any dirt, oxidation or other foreign materials from ICF Block surface prior to application or coating. [. . . ] The base coat is field mixed with potable (clean) water to desired consistency and applied to surface. Mix vigorously to disperse all lumps and thoroughly wet all particles. Finish coat of MULTI-TEX STUCCO is applied onto base coat and textured to desired finish. IMMEDIATELY EMBED FIBERGLASS MESH INTO BASE COAT & TROWEL APPLY MULTI-TEX STUCCO FINISH & TEXTURE TO DESIRED FINISH COVERAGE Each 65 lb bag of KRETE KOTE, SCRATCH KOTE or MULTI-BASE will cover approximately 60-120 sq. Seller's sole obligation shall be to replace material if found to be defective. Seller shall not be liable for any damage, injury, loss, direct or consequential, resulting from use of its products. PACKAGING AND STORAGE BASE COAT ­ SCRATCH KOTE/KRETE KOTE or MULTI-BASE is furnished in 65 lb bags. STUCCO FINISH ­ MULTI-TEX STUCCO furnished in 65 lb - 5 gallon pails, Ready-to-Use. [. . . ] Shelf life is approximately 24 months in unopened bags and approximately 18 months in unopened pails. TEST DATA: ICF STUCCO SYSTEM The ICF STUCCO SYSTEM complies with Federal Specification TT. C-55b for "Coating, Textured for Interior and Exterior Masonry Surfaces. " STUCCO MIX TEST METHOD RESULTS 1. [. . . ]